People often wonder how their fridge works. If you want to learn about refrigeration, watch the video or read the text below. You’ll get to know a refrigerator’s main parts and learn what happens to refrigerants as it moves through the system. You can explore some budget friendly options for rent fridge Bangalore for the next time you visit the city.
The compressor is the “heart” of a refrigerator, and it moves the water and food inside. In this way, the refrigerant moves around the system and adds pressure to the parts that are warm. This makes the refrigerant hot. It’s like when you pump air into a bicycle tube and you can feel the pump getting hotter as you compress the air.
There is a part of a refrigerator called the condenser that is on the back of the refrigerator and it is likely to be very dirty.
It is inside of a refrigerator and is the part that makes things in the fridge cold. As the refrigerant evaporates, it cools the area around it, making it the right temperature to store food.
A Capillary Tube
The capillary tube is a piece of tubing that is very small and can be used to make things bigger. The liquid refrigerant travels through the capillary tube and is sprayed into the low-pressure environment of the evaporator, where it cools things down quickly.
The thermostat is in charge of the cooling process. It monitors the temperature and then turns the compressor on and off based on that. A refrigerator’s compressor is turned off when the sensor thinks it’s cold enough inside, so it doesn’t need to keep running. if it senses too much heat, it turns on the compressor again and starts the cooling process over from the beginning again.
An Explanation of How a Refrigerator Works
Capillary tubes are used to change the refrigerant from liquid to gas and start the process of evaporation. The pressure on the refrigerant needs to be reduced through this tube. The same thing happens when you use an aerosol product, like hair spray. When you open an aerosol can, the pressure/liquid side comes out, the capillary tube comes out, and the open space comes in. This is called the “evaporator.” To make it into a gas, you let it out into a lower-pressure area.
When you want to keep a refrigerator running, you need to make the refrigerant gas again into a liquid. To do this, you need to compress the gas and make it hot and cold again. As you can see, the compressor comes into play here. Compressors work in the same way that a bike pump does. It gets hotter as you pump and compress the air, so you can tell when it gets hotter.
Afterwards, the gas should be under a lot of pressure and be hot. It needs to be cooled in the condenser, which is on the back of the refrigerator, so that its contents can be cooled by the air that comes from outside the fridge. Because of the high pressure, the gas cools down inside the condenser, but it turns back into a liquid when it’s still cool.This was in brief about how the refrigerator works. Check out some budget friendly options on refrigerator on rent in Gandhinagar for the next time you visit the city.